Dollhouse Lighting Book 

This book is written for both tape-wire and round wire. It teaches the basic wiring techniques and includes easy step-by-step instructions through any wiring/lighting project.

Tape-wire Instruction Book

This book contains everything from a master layout drawing to instructions on the installation of all electrical components. It also includes detailed "how to" illustrations on connecting wires to a plug, folding corners, wiring through hinges and "double bradding". With many shortcuts and money saving ideas.

How to Light Guide Book

Using simple, straightforward language this booklet describes the different types of wiring available and methods of installation. A useful primer before any lighting decisions are made.

Round Wire Instruction Book

Written for use of the CK104 wiring kit, it is easy to understand with illustrations abound depicting the wiring installation process, step-by-step. New technique are revealed for the first time. This book also explains how to remove or replace lighting fixtures incase of a lamp failure, the two methods of wiring; surface wiring for the finished or antique type dollhouse and the groove method for dollhouses under construction. These instructions are for both open back and open front type dollhouses.

Cir Kit  Tape-wiring (VHS)

This video introduces new color-coded tape-wire , describes how its use helps in making an error-free wiring system. There are computer animations to aid the understanding of the basic wiring concepts. You'll see how a dollhouse is wired in stages and how easily such accessories as outlets, switches, sconces and chandeliers may be installed even after wallpapering for a completely finished look.
This video was filmed and produced by a professional film studio and reflects the high standards and dedication to excellence that have become a hallmark of the Cir-Kit Concepts name.

CK Tape-wiring (DVD)

This DVD shows you how a dollhouse is wired in stages and how easily such accessories as outlets, switches, sconces, and chandeliers may be installed, even after wallpapering for a completely finished look.

 Large Pin-in Ceiling Globe

Nails are imbedded in the globes allow pounding the fixture directly into a tape run with no additional wiring or electrical connections and contains 12-volt GOW bulb drawing approximately 60 ma of current and is approximately 1/2" in diameter

Small Pin-in Ceiling Globe

Nails are imbedded in the globes allow pounding the fixture directly into a tape run with no additional wiring or electrical connections and contains 12-volt GOW bulb drawing approximately 60 ma of current and is approximately the CK842, 3/8".

Brass Plated Ceiling Canopies

This ceiling canopy makes any chandelier removable with just a "twist of the wrist". Complete instructions included.

Sconce Adapters Round

The adapter ring is fully brass plated making it suitable for even the most ornate of wall fixtures. Complete step-by-step instructions, with detailed illustrations, are included in each package. Special spring-loaded eyelets are included with each adapter. These eyelets grip the adapter plug and ensure a tight fit against the wall.

Sconce Adapters Hexagon

The adapter ring is fully brass plated making it suitable for even the most ornate of wall fixtures. Complete step-by-step instructions, with detailed illustrations, are included in each package. Special spring-loaded eyelets are included with each adapter. These eyelets grip the adapter plug and ensure a tight fit against the wall.

Spring Loaded Eyelet (2 pack)

A -- Chandelier Adapter (15/32 diameter)

B -- Chandelier Adapter (19/32 diameter)

C -- Chandelier Adapter (11/16 diameter)

D -- Chandelier Adapter (27/32 Adapter)

Plug-In Ceiling Plate

Its a push-in, pull-out adapter, but is designed primarily for use with chandeliers having a chain but no attached ceiling plate. It can also replace an existing ceiling plate when a more snug-to-the-ceiling appearance is desired. It measures a mere 5/8" in diameter by 3/16" thick, making it one of the lowest profile plug-in plates available.

Bass Ceiling Plate

  The CK806 Ceiling Plate allows any light to be mounted on the same surface as the tape run and become a truly "plug-in" fixture.

Black Ceiling Plate

Chandelier Adapter

Half Scale
The brass-plated finish and flush fit results in a matching and beautifully coordinating ceiling plate assembly. It measures a mere 11/32" diameter by 3/32" thick.

Wall Outlet

Half Scale
The wall outlet measures a mere 1/4" long by 3/16" wide by 1/8" think.

1/8 in. Brass Brads

Approximately: 300
Their small size permits usage on even the thinnest of wood walls and nearly disappear from view when pounded into a conductive tape run. Measure approximately 1/8" by .024".

1/8 in. Brass Brads

Approximately: 60
Their small size permits usage on even the thinnest of wood walls and nearly disappear from view when pounded into a conductive tape run. Measure approximately 1/8" by .024".

1/4 in. Brass Brads

Approximately: 100
The 1/4" brads are made of solid brass and may be used for dozens of electrical and woodworking projects

Small Hollow Eyelets (20 pack)

They may be used as a substitute for 1/8" brass brads in almost all applications. Eyelets are brass and measure approximately 1/8" long with an inside diameter of .044" and outside diameter of .056". Illustrated instructions included in each package.

Small Hollow Eyelets (110 pack)

They may be used as a substitute for 1/8" brass brads in almost all applications. Eyelets are brass and measure approximately 1/8" long with an inside diameter of .044" and outside diameter of .056". Illustrated instructions included in each package.

Large Hollow Eyelets (20 pack)

Eyelets are brass and measure approximately 3/16" long with an inside diameter of .054" and outside diameter of .071". Packaged in quantities of 20. Illustrated instructions in package.

Wood Screws (20 pack)

Useful in any miniature project requiring small fasteners, the screws are approximately 7/16" long and .060" in diameter

 Flanged Spade Lugs, Insulated (6 pack)

The spade lugs can be attached to a wide range of 18-24 gauge wire sizes and used for connecting wires either to transformer or terminal block screws.

Headless Pins

Pins are made of solid brass and measure approximately 1/2" in length by .032" in diameter. Solder when used with tape-wire for best electrical contact.

Two-Pole Terminal Block

Size: 1-1/2"
Electrical connection exists between opposite screw terminals and one or more wires may be attached to each screw terminal.

Four-Pole Terminal Block

Size: 2-1/4"
Electrical connection exists between opposite screw terminals and one or more wires may be attached to each screw terminal.

Six-Pole Terminal Block

Size: 3"
Electrical connection exists between opposite screw terminals and one or more wires may be attached to each screw terminal.

Two Pole Pound-in Terminal Block

Place the protruding pins over the respective copper foils, pound in, and an electrical circuit is automatically made between the screw terminals and copper conductors. Attach wires to the screw terminals to complete the wire to tape connection. Measures 1-3/8" long by 5/8" wide. Wood mounting screws included.